SKU Structure Overview
The SKU is a set of 23 characters including both numbers and letters. Each SKU is assigned to a product and describes its set of features (each configuration has a unique SKU). Although the basic SKU structure is similar across all products, there are small differences between SOMs and Carriers, and also between the three families due to different possible features.
Basic Structure for SOMs:
Basic Structure for Carriers, Kits and SBCs:
SOM SKU
NXP SOMs SKU:
- The first two letters are [SR] – indicating SolidRun.
- The next set of 5 letters and numbers indicates the processor name and type. For NXP SOMs this could be [MX6] – i.MX6, [MX8] – i.MX8M, [MM8] – i.MX8M Mini, [MN8] – i.MX8M Nano and [MP8] – i.MX8M Plus followed by two letters for the type, i.e [QD] for Quad or [DL] for Dual Lite. For LX2160 this field shall be [X2160]
- The next set of 3 letters and numbers indicates WiFi/BT with two possibilities: [WT1] for included WiFi/BT or [W00] for non-included. In LX2160 this field is [S01] for SPI NOR flash.
- The next 4 characters indicate DDR memory, starting with the letter [D] and followed by memory amount, i.e [D02G] for 2 GB or [D512] for 512 MB.
- The next 4 characters indicate eMMC memory, starting with the letter [E] and followed by the amount, i.e [E008] for 8GB eMMC.
- The next set of 3 characters indicates the version of the SOM, i.e [V15] for version 1.5.
- The next letter indicates the temperature grade in a single letter – [C] for commercial, [A] for automated and [I] for industrial.
- The final number indicates fusing – [0] for non-fused or [F] for fused. For LX2160 this is a placeholder chart.
Marvell SOMs SKU
- The first two letters are [SR] – indicating SolidRun.
- The next set of 5 letters and numbers indicates the processor name. For Marvell A388 SOMs this is [M6828] or [M8040] for ARMADA A8040, or [C9130/1/2] for CN913x
- The next set of 3 letters and numbers indicates SPI: For A388 SOMs this is [S32], for A8040 and CN913x this is [S64].
- The next 4 characters indicate DDR memory, starting with the letter [D] and followed by memory amount, i.e [D01G] for 1GB.
- The next 4 characters indicate eMMC memory, starting with the letter [E] and followed by the amount, i.e [E008] for 8GB eMMC.
- The next set of 3 characters indicates the version of the SOM, i.e [V21] for version 2.1.
- The next letter indicates the temperature grade in a single letter – [C] for commercial and [I] for industrial.
- The final number is a placeholder and always [0].
Kits SKUs
NXP Kits SKU
- The first two letters are [SR] – indicating SolidRun.
- The next set of 5 letters and numbers indicates the SOM name and type. For NXP SOMs this could be [MX6], [MX8], [MM8], [MN8], [MP8] followed by two letters for the type, i.e [QD] for Quad or [DL] for Dual Lite. For NXP LX2160A this will mean [LX216].
- The next set of 3 letters and numbers indicates WiFi/BT with two possibilities: [WT1] for included WiFi/BT or [W00] for non-included. In LX2160A product family this field is noted with [S00] for SPI NOR flash.
- The next 4 characters indicate DDR memory, starting with the letter [D] and followed by memory amount, i.e [D02G] for 2GB or [D512] for 512 MB.
- The next 4 characters indicate eMMC memory, starting with the letter [E] and followed by the amount, i.e [E008] for 8GB eMMC.
- The next set of 3 characters indicates the carrier/SBC type and revision: [B00] for HummingBoard Base, [P00] for HummingBoard Pro, [G00] for HummingBoard Gate, or [E00] for HummingBoard Edge, for LX2160A product family this means; [H00] for HoneyComb, [C00] for ClearFog CX. For HummingBoard Pules it’s [U00], Ripple [R00], Mate [M00].
- The next letter indicates the temperature grade in a single letter – [C] for commercial, and [I] for industrial.
- The final letter indicates either [E] for including enclosure or [H] for heatsink.
Marvell Kits SKU
- The first two letters are [SR] – indicating SolidRun.
- The next set of 5 letters and numbers indicates the SOM name and type. For Marvell SOMs this could be [M8040] (for the 8040 SoC) or [M6828] (for the A388 SOM).
- The next set of 3 letters and numbers indicates SSD, which could be [S00] for no SSD included, or [S32] for example indicating 32GB SSD.
- The next 4 characters indicate DDR memory, starting with the letter [D] and followed by memory amount, i.e [D02G] for 2GB or [D512] for 512 MB.
- The next 4 characters indicate eMMC memory, starting with the letter [E] and followed by the amount, i.e [E008] for 8GB eMMC.
- The next set of 3 characters indicates the type of the SBC and revision: [B00] for ClearFog Base, [P00] for ClearFog Pro, [S00] for MACCHIATObin Single Shot, [D00] for MACCHIATObin Double Shot and [G00] for the ClearCloud 8K.
- The next letter indicates the temperature grade in a single letter – [C] for commercial and [I] for industrial.
- The final letter indicates either [E] for including enclosure or [H] for heatsink.
