Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
products:ibx:microsom [2016/04/17 12:29] malte [Comparison Table] |
products:ibx:microsom [2017/04/24 05:53] (current) malte [Comparison Table] |
||
---|---|---|---|
Line 12: | Line 12: | ||
- | ^ Description/Model ^ MicroSom IB8000 ^ MicroSom IB3710 ^ | + | ^ Description/Model ^ MicroSom IB8000 ^ MicroSom IB3710 ^ |
- | ^ System on Chip | Intel Atom E8000 | Intel Pentium N3710 | | + | ^ System on Chip | Intel Atom E8000 | Intel Pentium N3710 | |
- | ^ Processor Core | 4 | 4 | | + | ^ Processor Core | 4 | 4 | |
- | ^ Memory (RAM) | 1GB/2GB/4GB/8GB | Up to 8GB (default size) | | + | ^ Memory (RAM) | 1GB/2GB/4GB/8GB | Up to 8GB (default size) <sup>1</sup> | |
- | ^ CPU HFM Clock (GHz) | 1.04, Burst 2.00 | 1.60, Burst 2.56 | | + | ^ CPU HFM Clock (GHz) | 1.04, Burst 2.00 | 1.60, Burst 2.56 | |
- | ^ Graphic GPU | Intel Gen8 LP – 12EU | Intel Gen8 LP – 16EU | | + | ^ Graphic GPU | Intel Gen8 LP – 12EU | Intel Gen8 LP – 16EU | |
- | ^ GPU HFM Clock (MHz) | 320, Turbo Clock 600 | 400, Turbo Clock 700 | | + | ^ GPU HFM Clock (MHz) | 320, Turbo Clock 600 | 400, Turbo Clock 700 | |
- | ^ Max Resolution DP 1.1a, HDMI 1.4b) | 3840×2160 @30 Hz, 2560×1600 @60;\\ 24 bpp. eDP 1.4 Max 2560×1600 @60; 24bpp | 3840×2160 @30 Hz, 2560×1600 @60;\\ 24 bpp. eDP 1.4 Max 2560×1600 @60; 24 bpp | | + | ^ Max Resolution DP 1.1a, HDMI 1.4b) | 3840×2160 @30 Hz, 2560×1600 @60;\\ 24 bpp. eDP 1.4 Max 2560×1600 @60; 24bpp | 3840×2160 @30 Hz, 2560×1600 @60;\\ 24 bpp. eDP 1.4 Max 2560×1600 @60; 24 bpp | |
- | ^ Junction temp. range | 0C-90C | 0C-90C | | + | ^ Junction temp. range | 0C-90C | 0C-90C | |
- | ^ Dimensions | 52.8mm x 40mm | 52.8mm x 40mm | | + | ^ Dimensions | 52.8mm x 40mm | 52.8mm x 40mm | |
- | ^ Max. height from carrier | 6.1mm to 8.6mm (depending on DF40 1.5-4.0 mm mating height on carrier board) | 6.1mm to 8.6mm (depending on DF40 1.5-4.0 mm mating height on carrier board) | | + | ^ Max. height from carrier | 6.1mm to 8.6mm (depending on DF40 1.5-4.0 mm mating height on carrier board) | 6.1mm to 8.6mm (depending on DF40 1.5-4.0 mm mating height on carrier board) | |
- | ^ Mechanical fastening | 3 x M1.8 mechanical holes | 3 x M1.8 mechanical holes | | + | ^ Mechanical fastening | 3 x M1.8 mechanical holes | 3 x M1.8 mechanical holes | |
- | ^ DDR-3L | Onboard one channel (1GByte version) and dual channel (all other) DDR3L 1600Mbps , up to 8GByte total | Onboard one channel (1GByte version) and dual channel (all other) DDR3L 1600Mbps , up to 8GByte total | | + | ^ DDR-3L | Onboard one channel (1GByte version) and dual channel (all other) DDR3L 1600Mbps , up to 8GByte total | Onboard one channel (1GByte version) and dual channel (all other) DDR3L 1600Mbps , up to 8GByte total | |
- | ^ Network | Onboard 10/100/1000 Mbps (RTL8111G) | Onboard 10/100/1000 Mbps (RTL8111G) | | + | ^ Network | Onboard 10/100/1000 Mbps (RTL8111G) | Onboard 10/100/1000 Mbps (RTL8111G) | |
- | ^ SPI flash (for BIOS) | Onboard 64 Mbit – externally programmable via 8 pin header | Onboard 64 Mbit – externally programmable via 8 pin header | | + | ^ SPI flash (for BIOS) | Onboard 64 Mbit – externally programmable via 8 pin header | Onboard 64 Mbit – externally programmable via 8 pin header | |
- | ^ eMMC | Optional – from 4GB to 128GB | 1 | | + | ^ [[products:ibx:microsom:emmc|eMMC]] | Optional – from 8GB to 128GB | Optional – from 8GB to 128GB <sup>1</sup> | |
- | ^ PMIC | Onboard – battery powered optimized | Onboard – battery powered optimized | | + | ^ PMIC | Onboard – battery powered optimized | Onboard – battery powered optimized | |
- | ^ Vin (Vsys) | Single 7v to 21v | Single 7v to 21v | | + | ^ Vin (Vsys) | Single 7v to 21v | Single 7v to 21v | |
- | ^ Voltages out for carrier | MicroSoM™ provides voltage for carrier – V5S (2.8A), V3P3S (2.1A), V3P3A (2.8A), V1P8A (1.75A), V1P8S (1.05A) | MicroSoM™ provides voltage for carrier – V5S (2.8A), V3P3S (2.1A), V3P3A (2.8A), V1P8A (1.75A), V1P8S (1.05A) | | + | ^ Voltages out for carrier | MicroSoM™ provides voltage for carrier – V5S (2.8A), V3P3S (2.1A), V3P3A (2.8A), V1P8A (1.75A), V1P8S (1.05A) | MicroSoM™ provides voltage for carrier – V5S (2.8A), V3P3S (2.1A), V3P3A (2.8A), V1P8A (1.75A), V1P8S (1.05A) | |
- | ^ B2B Connectivity | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | | + | ^ B2B Connectivity | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | |
- | ^ Display | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | | + | ^ Display | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | |
- | ^ Camera | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | | + | ^ [[products:ibx:microsom:camera|Camera]] | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | |
- | ^ USB 3.0 | 4 (one of them OTG) | 4 (one of them OTG) | | + | ^ USB 3.0 | 4 (one of them OTG) | 4 (one of them OTG) | |
- | ^ PCIe Gen 2.0 1 lane | 3 | 3 | | + | ^ PCIe Gen 2.0 1 lane | 3 | 3 | |
- | ^ SATA 6 Gbps gen III | 2 | 2 | | + | ^ SATA 6 Gbps gen III | 2 | 2 | |
- | ^ Full UART | 2 | 2 | | + | ^ Full UART | 2 | 2 | |
- | ^ I2C | 1 | 1 | | + | ^ I2C | 1 | 1 | |
- | ^ HD Audio | On carrier board | On carrier board | | + | ^ HD Audio | On carrier board | On carrier board | |
- | ^ MCU: STM32F042K4U6 | On board – 5 generic input/output, 1 x HDMI CEC, and 1 x IR input \\ Connected by internal USB to main processor \\ Reset and boot signals of MCU are processor-controlled to ease development | On board – 5 generic input/output, 1 x HDMI CEC, and 1 x IR input \\ Connected by internal USB to main processor \\ Reset and boot signals of MCU are processor-controlled to ease development | | + | ^ [[products:ibx:software:development:drivers#stm32_mcu|MCU: STM32F042K4U6]] | On board – 5 generic input/output, 1 x HDMI CEC, and 1 x IR input \\ Connected by internal USB to main processor \\ Reset and boot signals of MCU are processor-controlled to ease development | On board – 5 generic input/output, 1 x HDMI CEC, and 1 x IR input \\ Connected by internal USB to main processor \\ Reset and boot signals of MCU are processor-controlled to ease development | |
- | ^ SD interface | 4 data pins with programmable 3.3v / 1.8v voltage rail | 4 data pins with programmable 3.3v / 1.8v voltage rail | | + | ^ SD interface | 4 data pins with programmable 3.3v / 1.8v voltage rail | 4 data pins with programmable 3.3v / 1.8v voltage rail | |
- | ^ PMU | 2 wakeup signals and other power management indications | 2 wakeup signals and other power management indications | | + | ^ PMU | 2 wakeup signals and other power management indications | 2 wakeup signals and other power management indications | |
- | ^ RTC Battery | RTC switchover on MicroSoM, 3.3v battery on carrier | RTC switchover on MicroSoM, 3.3v battery on carrier | | + | ^ RTC Battery | RTC switchover on MicroSoM, 3.3v battery on carrier | RTC switchover on MicroSoM, 3.3v battery on carrier | |
- | ^ GPIOs | Multiplexed with multiple functions, including:\\ UART, I2C, SATA DevSlp, PCIE CLKREQ, SDI | Multiplexed with multiple functions, including:\\ UART, I2C, SATA DevSlp, PCIE CLKREQ, SDI | | + | ^ GPIOs | Multiplexed with multiple functions, including:\\ UART, I2C, SATA DevSlp, PCIE CLKREQ, SDI | Multiplexed with multiple functions, including:\\ UART, I2C, SATA DevSlp, PCIE CLKREQ, SDI | |
+ | <sup>1</sup> Please note that the 8GB RAM configuration can not boot from eMMC. eMMC can only be used as storage in that configuration. | ||
==== External Links ==== | ==== External Links ==== | ||
* https://www.solid-run.com/intel-braswell-family/braswell-som-system-on-module/ | * https://www.solid-run.com/intel-braswell-family/braswell-som-system-on-module/ | ||