Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
products:ibx:microsom [2016/10/02 10:26] malte [Table] |
products:ibx:microsom [2017/04/24 05:53] malte [Comparison Table] |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| ^ System on Chip | Intel Atom E8000 | Intel Pentium N3710 | | ^ System on Chip | Intel Atom E8000 | Intel Pentium N3710 | | ||
| ^ Processor Core | 4 | 4 | | ^ Processor Core | 4 | 4 | | ||
| - | ^ Memory (RAM) | 1GB/2GB/4GB/8GB | Up to 8GB (default size) | | + | ^ Memory (RAM) | 1GB/2GB/4GB/8GB | Up to 8GB (default size) <sup>1</sup> | |
| ^ CPU HFM Clock (GHz) | 1.04, Burst 2.00 | 1.60, Burst 2.56 | | ^ CPU HFM Clock (GHz) | 1.04, Burst 2.00 | 1.60, Burst 2.56 | | ||
| ^ Graphic GPU | Intel Gen8 LP – 12EU | Intel Gen8 LP – 16EU | | ^ Graphic GPU | Intel Gen8 LP – 12EU | Intel Gen8 LP – 16EU | | ||
| Line 27: | Line 27: | ||
| ^ Network | Onboard 10/100/1000 Mbps (RTL8111G) | Onboard 10/100/1000 Mbps (RTL8111G) | | ^ Network | Onboard 10/100/1000 Mbps (RTL8111G) | Onboard 10/100/1000 Mbps (RTL8111G) | | ||
| ^ SPI flash (for BIOS) | Onboard 64 Mbit – externally programmable via 8 pin header | Onboard 64 Mbit – externally programmable via 8 pin header | | ^ SPI flash (for BIOS) | Onboard 64 Mbit – externally programmable via 8 pin header | Onboard 64 Mbit – externally programmable via 8 pin header | | ||
| - | ^ eMMC | Optional – from 4GB to 128GB | 1 | | + | ^ [[products:ibx:microsom:emmc|eMMC]] | Optional – from 8GB to 128GB | Optional – from 8GB to 128GB <sup>1</sup> | |
| ^ PMIC | Onboard – battery powered optimized | Onboard – battery powered optimized | | ^ PMIC | Onboard – battery powered optimized | Onboard – battery powered optimized | | ||
| ^ Vin (Vsys) | Single 7v to 21v | Single 7v to 21v | | ^ Vin (Vsys) | Single 7v to 21v | Single 7v to 21v | | ||
| Line 33: | Line 33: | ||
| ^ B2B Connectivity | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | | ^ B2B Connectivity | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | 3×80 pin Hirose DF40 (1.5mm to 4mm mating) | | ||
| ^ Display | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | | ^ Display | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | 4K30 DisplayPort / HDMI and 4K30 DisplayPort / embedded DisplayPort | | ||
| - | ^ [[products:ibx:software:development:camera|Camera]] | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | | + | ^ [[products:ibx:microsom:camera|Camera]] | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | Via Flex cable – One 4 lane MIPI CSI-2 and one 2 lane MIPI CSI-2 | |
| ^ USB 3.0 | 4 (one of them OTG) | 4 (one of them OTG) | | ^ USB 3.0 | 4 (one of them OTG) | 4 (one of them OTG) | | ||
| ^ PCIe Gen 2.0 1 lane | 3 | 3 | | ^ PCIe Gen 2.0 1 lane | 3 | 3 | | ||
| Line 49: | Line 49: | ||
| + | <sup>1</sup> Please note that the 8GB RAM configuration can not boot from eMMC. eMMC can only be used as storage in that configuration. | ||
| ==== External Links ==== | ==== External Links ==== | ||
| * https://www.solid-run.com/intel-braswell-family/braswell-som-system-on-module/ | * https://www.solid-run.com/intel-braswell-family/braswell-som-system-on-module/ | ||