Marvell ARMADA 8040 Development and Debug interfaces
Overview
The 8040 board offers different interfaces for development and debugging:
- Console port (UART) over microUSB connector
- 20-pin Connector for CPU JTAG debugger
- 2 X UART Headers
UART Header
UART Header pinout. Pin-1 marked on PCB
UART Header 1 (CAP1-UA0) Pinout
| Pin | Function | Connection |
|---|---|---|
| 1 | Ground | |
| 2 | RXD (In) | CP0 MPP41 |
| 3 | TXD (Out) | CP0 MPP40 |
UART Header 2 (CAP0-UA0) Pinout
| Pin | Function | Connection |
|---|---|---|
| 1 | Ground | |
| 2 | RXD (In) | CP1 MPP6 |
| 3 | TXD (Out) | CP0 CP1 MPP7 |
JTAG Header
MicroUSB
At the bottom of the board you can find a MicroUSB connector. [AP_MPP11 (TX), AP_MPP19 (RX)]
It includes a FT230X USB to Serial and can be used as serial console.